Centered Housing 9" Ford Rear End Smooth Back - Select Length

Centered 9 inch Rear End Housing Smooth Back

Alternative Views:

PART NUMBER:

RSC-52000

Centered Housing, smooth back, 9" Ford rear end. 3" OD tube and all jig welded. Available with New style big bearing Torino or Early style big bearing brake flanges and available in any lengths. Remember that most brakes and axles are 2.5" offset so you will typically want a 5" narrower rear end housing than the desired axle flange to axle flange width. SOLD EACH

Oversize / Overweight Shipping

: $549.99

Select Housing Flange Pattern*:
Select Length*:
Enter Custom Length Using Inches:

Qty:

Overview

FEATURES:

These rear ends are perfect for any hot rod and available in different widths to get the wheels in the correct spot. The smooth center section has ample clearance for all third members and is set up in the jig centered with offset pinion so when you look at the back of the car everything looks symmetrical. Even better it has the large diam. 3" OD tubing to work with all aftermarket bracketry. We offer this rear end with a choice of either: Early style big bearing flanges or New style big bearing flanges to suit the 2 most common rear brakes on the market, be sure to select from the drop down menu. We do our best to stock 50", 51", and 52" wide housings which make up 55", 56", and 57" axle flange to axle flange when using standard 2 1/2" axle offset. Custom shorter or longer lengths are available but may take up to 3 weeks to complete and cost an additional $25.00

WHAT'S INCLUDED:

1 (ONE)

9" Ford Centered Rear End Housing

NOTES & TIPS:

Centered housing means that the pinion will be off center, requiring the axles to be different lengths. If ordering axles be sure to advise that the housing is centered to ensure you get the correct lengths.